The Channel Master PreAmp 1 is a professional-grade TV antenna pre-amplifier designed to enhance the performance of any (non-amplified) professional-grade outdoor TV antenna. The PreAmp 1 will boost antenna signal strength, improve signal quality and may increase the number of channels received. The PreAmp 1 includes many features including a new high/low gain adjustment switch on the power inserter and adjustability from inside the home. The ultra-low noise amplifier also leverages a new internal filter design that is optimized to support current digital TV standards as well as future TV standards. The heavy-duty weatherproof metal housing is designed to be installed outdoors near the antenna where it will provide the best results. The mounting bracket included with the PreAmp 1 will accommodate a mast or mounting pole up to 2" in diameter. There is also no need for an electrical outlet near the antenna, it can be powered over the coaxial cable using the included power inserter.
Benefits
- Improves signal quality
- Decreases pixelation
- May increase number of channels
- Ultra-low noise
- Adjustable gain (17 dB/30 dB)
- Blocks LTE interference from 3G/4G/5G smartphones and transmitters
- EMI & FM Out of Band filtering (does not pass FM signals)
- Will support ATSC 3.0, NextGen TV, and 4K Broadcast when available
- Housing offers RF shielding for reducing interference
- Heavy-duty rated for indoor or outdoor use
- Mast mounted for close proximity to antenna
- Note: When installing a splitter with this amplifier it must be a power passing splitter, most common splitters will not pass power
-
Tech specs
- Impedance (Input and Output): 75 Ohm
- Connector: F-type
- Frequency Range: 54MHz~88MHz,174MHz-260MHz,470MHz~608MHz
- Gain: +30dB (High) / +17dB (Low)
- Noise Figure: Typically Less than 2dB
- Input/Output Return Loss: <-12
- Max Input Level: 18 (High) 10 (Low) dBmV
- Max Output Level: 34 dBmV
- FM Trap: 88MHz; >2dB, 95-108 MHz; >14dB
- Power Consumption: <3W
- Operating Temperature: -40°C to +60°C
- UL Listed, RoHS Compliant: Yes
Box Contents- 1 x PreAmp 1 TV Antenna Pre-Amplifier
- 1 x 6' Coaxial Cable for Power Adapter Connection
- 1 x Power Inserter with High/Low Gain Switch
- 1 x Power Adapter
- 1 x Heavy Duty Mounting Bracket (Accommodates Masts up to 2" in Diameter.)
- 2 x Mounting Screws
- Installation Guide
- 1-Year Limited Warranty
