ETA is 5-8 weeks once an order is complete.If not in stock.
With free shipping you have to pick up In Elmira Ontario.I will set this up once you order.
If you wish to have a shipping quote send information before you order to ackert@execulink.com
If you would like a shipping quote, I will need to know the address it is shipping to, if it is a residential or business location.
If there will be a fork lift or some way to get it off the truck when it arrives.
(if it is to be hand balmed off the truck by people you have there ready to unload, we need to know that as well as we need to account for the time).
Tower can also be arranged for you to pick up at Trylon.
Since its introduction in 1977, the TITAN Self-Support Tower has been used in over 15,000 successful installations across North America. Applications include telemetry, satellite TV, wireless LAN, wireless Internet, mobile radio and amateur radio. The TITAN self-supporting tower is a modular, pre-engineered system available in heights up to 96 ft. (28.8 m). The system consists of 12 different 8-ft (2.4 m) sections designed to interlock with one another. Material used for all members is formed, pre-galvanized steel sheets with a minimum yield of 35,000-psi. The diagonal members are installed at a shallow angle, allowing them to be climbed. The tower members are graded out with a high degree of finesse, producing a very cost-effective, high-strength tower. The Trylon TITAN towers are designed for failure ratings only and are not designed per EIA/TIA standards which allow for additional safety factors in the design. All antenna loadings shown represent maximum failure loadings with a "N/A" denoting tower failure at the corresponding wind speed. TITAN towers are not designed for heavy commercial applications. For Trylon self-supporting towers that meet both EIA and TIA design guidelines please see the SuperTITAN.
- Tower Series: T200
- Leg Type: Angle
- Leg Connection: Splice plates
- Engineering: Pre-engineered
- Climbing Application: Incorporated into tower face
- Tower Type: Self-Supporting
(1) 4.95.0022.000* Tower top section #2 with 1.9-in OD x 8-ft pipe (includes angle frames and U-bolt assembly)
(1) 4.95.0031.000 Tower section #3
(1) 4.95.0041.000 Tower section #4
(1) 4.95.0051.000 Tower section #5
(1) 4.95.0061.000 Tower section #6
(1) 4.95.0071.000 Tower section #7
(1) 4.95.0081.000 Tower section #8
(1) 4.95.0091.000 Tower section #9
(1) 4.81.0110.000 Anchor stub leg #10 for concrete embedment
All necessary splice hardware for connecting the sections together.
*To support the mounting pipe, every top section is factory-installed with angle frames and U-bolts at the top and middle of the section.
Tower height shown is nominal. Actual tower height is achieved using the support pipe supplied with the tower.
