ADDITIONAL SHIPPING AND HANDLING CHARGE APPLIES
CONTACT US FOR DETAIL$
With free shipping you have to pick up In Brantford or Trenton Ontario,we also might have at our Edmonton Alberta Warehouse.I will set this up once you order.
If you wish to have a shipping quote send information before you order to ackert@execulink.com
Series: DMX Self-Supporting
Model DMXHD-40N 40 foot DMX heavy duty tower. Packaged complete with CBS-07 concrete base stubs, top plate, rotor plate, 2 model 244A cast aluminum mast clamps and all necessary hardware. Mast not included.
FEATURES:
- Attractive tapered design.
- “X” brace with beaded channel leg
- Enhancements made to both leg profile and taper allow for easier installation and improved tower structure
- High strength galvanized steel construction
- Eight foot sections
- Sections 5 to 7 are 12 gauge, 3 & 4 are 16 gauge galvanized steel
- Compact shipping package
- Free standing installation
- Ideal for amateur radio and industrial/commercial communications applications
- Climb shields recommended
- Designed to withhold impact load of a climber in case of a fall in accordance with CSA-S37-13. See installation instructions for more information.*
LOAD LIMITS: DMXHD Heavy Duty Towers are designed to support up to 9 square feet (0.84 m2) projected wind area.**
NOTE: Never install a tower or tower section found to have missing or damaged components. Only Wade replacement components or hardware may be used on DMX products. Failure to exercise this caution can result in injury or death. Consult distributors for replacement sections or parts if required.
* Towers have not been tested to be in compliance with other sections of CSA-S37-13.
** Tower load limits are based on survival, and cannot be stamped by a licensed engineer.
- Tower Height: 40' (12.2m)
- Wind Load: 9 sq.ft.
Skidded Dimensions: 101" L x 32" W x 29" H / Cubic Feet: 27.1 / Weight: 336 lbs
Unskidded Dimensions: 96" L x 27" W x 27" H / Cubic Feet: 20.25 / Weight: 276 lbs
