Wade DMXMD-56N 56' Medium Duty

Model DMXMD-56N 56 foot DMX medium duty tower. Packaged complete with CBS-08 concrete base stubs, top plate, rotor plate, (2) model 244A cast aluminum mast clamps and all necessary hardware. Mast not included.

FEATURES:

• Attractive tapered design.
• “X” brace with beaded channel leg
• Enhancements made to both leg profile and taper allow for easier installation and improved tower structure
• High strength galvanized steel construction
• Eight foot sections
• Sections 5 to 8 are 12 gauge, 2 to 4 are 16 gauge galvanized steel
• Compact shipping package
• Free standing installation
• Ideal for amateur radio and industrial/commercial communications applications
• Climb shields recommended   
• Designed to withhold impact load of a climber in case of a fall in accordance with CSA-S37-13. See installation instructions for more information.*

LOAD LIMITS:  DMXMD Medium Duty Towers are designed to support up to 6 square feet (0.56 m2) projected wind area.**

NOTE:  Never install a tower or tower section found to have missing or damaged components. Only Wade replacement components or hardware may be used on DMX products. Failure to exercise this caution can result in injury or death. Consult distributors for replacement sections or parts if required.

* Towers have not been tested to be in compliance with other sections of CSA-S37-13.

** Tower load limits are based on survival, and cannot be stamped by a licensed engineer.